HOOF NIPPERS

Sort By:  
H-13 Blades with Stainless Steel Reins
$220.00
H-13 Blades with Stainless Steel Reins
$210.00
H-13 Blades with Stainless Steel Reins
$205.00
H-13 Blades with Stainless Steel Reins
$220.00
H-13 Blades with Stainless Steel Reins
$210.00
H-13 Blades with Stainless Steel Reins
$220.00
H-13 Blades with Stainless Steel Reins
$140.00
H-13 Blades with Stainless Steel Reins
$165.00
H-13 Blades with Stainless Steel Reins
$210.00
MFC 16" Hoof Nipper (116111120MFC72797970-16)
MFC Horseshoeing Tools brand and Jim Keith Tools brand are beyond a doubt the best hoof nippers ever made. The different parts of a nipper have very different requirements, which means that in order to make the best nipper one would have to use the particular material best suited to that part of the tool. Obviously the reins of the tool which should be springy and not susceptible to rust, have much different requirements than the blade, which should be very hard but be tough enough to not chip if you should hit a small stone. The reins and joints of our nippers are made from 410 stainless, a self hardening stainless steel which is springy and resilient and hard enough to not collapse when pressure is applied.  The blades are made from H13 tool steel which is very hard yet tough enough to not chip if you should hit a small stone or a nail. You will find that your MFC or Jim Keith nippers will outlast any other brand made by at least twice yet maintain their shiny, like new appearance throughout their life.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$220.00
MFC 14" Hoof Nipper (116111120MFC72797970-14)
MFC Horseshoeing Tools brand and Jim Keith Tools brand are beyond a doubt the best hoof nippers ever made. The different parts of a nipper have very different requirements, which means that in order to make the best nipper one would have to use the particular material best suited to that part of the tool. Obviously the reins of the tool which should be springy and not susceptible to rust, have much different requirements than the blade, which should be very hard but be tough enough to not chip if you should hit a small stone. The reins and joints of our nippers are made from 410 stainless, a self hardening stainless steel which is springy and resilient and hard enough to not collapse when pressure is applied.  The blades are made from H13 tool steel which is very hard yet tough enough to not chip if you should hit a small stone or a nail. You will find that your MFC or Jim Keith nippers will outlast any other brand made by at least twice yet maintain their shiny, like new appearance throughout their life.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$210.00
MFC 12" Hoof Nipper (116111120MFC72797970-12)
MFC Horseshoeing Tools brand and Jim Keith Tools brand are beyond a doubt the best hoof nippers ever made.   The different parts of a nipper have very different requirements, which means that in order to make the best nipper one would have to use the particular material best suited to that part of the tool.   Obviously the reins of the tool which should be springy and not susceptible to rust, have much different requirements than the blade, which should be very hard but be tough enough to not chip if you should hit a small stone.   The reins and joints of our nippers are made from 410 stainless, a self hardening stainless steel which is springy and resilient and hard enough to not collapse when pressure is applied.    The blades are made from H13 tool steel which is very hard yet tough enough to not chip if you should hit a small stone or a nail.   You will find that your MFC or Jim Keith nippers will outlast any other brand made by at least twice yet maintain their shiny, like new appearance throughout their life.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$205.00
MFC 14" Half Round Nipper (116111120MFC72797970-14HR)
The MFC 14" Half Round has a 1" wide cutting blade and is made with an H-13 head and stainless steel handles so your nipper won't get rusty and ugly. Guaranteed against defects in materials and workmanship.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$220.00
MFC 14" Racetrack Hoof Nipper (116111120MFC72797970-14RT)
MFC Horseshoeing Tools brand and Jim Keith Tools brand are beyond a doubt the best hoof nippers ever made. The different parts of a nipper have very different requirements, which means that in order to make the best nipper one would have to use the particular material best suited to that part of the tool. Obviously the reins of the tool which should be springy and not susceptible to rust, have much different requirements than the blade, which should be very hard but be tough enough to not chip if you should hit a small stone. The reins and joints of our nippers are made from 410 stainless, a self hardening stainless steel which is springy and resilient and hard enough to not collapse when pressure is applied.  The blades are made from H13 tool steel which is very hard yet tough enough to not chip if you should hit a small stone or a nail. You will find that your MFC or Jim Keith nippers will outlast any other brand made by at least twice yet maintain their shiny, like new appearance throughout their life.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$210.00
MFC 12" Half Round Nipper (116111120MFC72797970-12HR)
The MFC 12" Half Round is made with an H-13 head and stainless steel handles. All MFC Nippers come with a 6 month warranty against defects. Model: 11551
H-13 Blades with Stainless Steel Reins
ADD TO CART
$220.00
MFC One Handed Foal Nipper (116111120MFC70796576-OHF)
The MFC 10" One Handed Foal Nipper comes with a 1" wide cutting blade and H-13 head and stainless steel handle. This foal nipper has hooks that go over the top of your hand and fingers, enabling you to open the nipper with only the one hand while you hold the hoof of the fractious baby with the other hand. No more need for a nipper spring which seems to work okay in your hand but then does not go nicely into the shoeing box. Ideal for horseshoer who do a lot of breeding farm work, or who do a lot of miniature horses. The 1" wide blade edge is hardened to Rockwell 65 hardness, the base of the blade to 60, and the handles to 50 (so they will not bend). All MFC hand tools come with a 6 month guarantee against defects.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$165.00
MFC 15" Hoof Nipper (116111120MFC72797970-15)
MFC Horseshoeing Tools brand and Jim Keith Tools brand are beyond a doubt the best hoof nippers ever made. The different parts of a nipper have very different requirements, which means that in order to make the best nipper one would have to use the particular material best suited to that part of the tool. Obviously the reins of the tool which should be springy and not susceptible to rust, have much different requirements than the blade, which should be very hard but be tough enough to not chip if you should hit a small stone. The reins and joints of our nippers are made from 410 stainless, a self hardening stainless steel which is springy and resilient and hard enough to not collapse when pressure is applied.  The blades are made from H13 tool steel which is very hard yet tough enough to not chip if you should hit a small stone or a nail. You will find that your MFC or Jim Keith nippers will outlast any other brand made by at least twice yet maintain their shiny, like new appearance throughout their life.
H-13 Blades with Stainless Steel Reins
ADD TO CART
$210.00
Per Page      1 - 9 of 9
  • 1